The use of container bags

① Loading. First, hang the lifting ring of the container bag symmetrically on the beam of the filling machine, so that the bottom of the container bag is basically in contact with the ground, then open the loading port of the container bag, put it into the charging barrel and clamp it by the clamping device to avoid dust or particle leakage. Start the filling machine to put the raw materials into the bag from the charging port, and straighten the bag body before filling. After filling, close the charging port. If using a container bag with a discharge port, check whether the bottom is tied well before filling.

② Loading. Hang the FIBC lifting rings on the lifting device evenly. According to the type and loading weight of the FIBC, forklifts, cranes, cranes, etc. can be selected. If a forklift is used to hoist the container bag, the shovel plate should be adjusted to the proper position, and the container bag should be close to the forklift truck and should not be tilted forward. In order to ensure the balance of the center of gravity of the bag body when hoisting, be careful not to hang a single ring. Then, start the lifting device to slowly lift the container bag, and after reaching a certain height, evenly lay it on the train (or car) platform. If they do not need to be loaded and transported immediately, they should be stacked neatly and uniformly at the workplace. During the hoisting and stacking process, do not squeeze, skew, or collide with each other.

③ Save. In principle, after the container bag is loaded, it should be loaded and left immediately, but if necessary, it cannot be transported immediately. In order to avoid material damage, the container bag should be stored in the warehouse, and the surrounding environment should be kept away from water, steam, humidity and High temperature sources, such as when stored outdoors, in addition to meeting the above environmental conditions, should also be covered with tarpaulins and avoid direct sunlight.

④ Unloading. Lift the container bag with a forklift or crane, align it with the mouth of the trough or other container, open the tether at the bottom of the bag body, and the raw material can fall by itself to complete the unloading. For single-use container bags, a suitable tool can be used to puncture the bottom of the bag at a distance to discharge the material. During lifting and unloading operations, do not stand under the FIBC.